Description
EndoCleaner endoscopy washing and disinfection device:
Disinfection process recorded
endoCleaner endoscopy washing and disinfection device is equipped with
an easy-to-use Radio Frequency Identification (RFID) management system, which
automatically records scope serial and model numbers, operator ID, and time of
reprocessing. This feature enables to record information about which device has
been disinfected by which operator at a given time.
Disinfection and washing process with endoCleaner;
- The endoscope is placed into the basin properly.
- The basin connector is installed.
- The biopsy channel hoses, handle connector hoses and aspiration channel
hoses are connected. - The washing and disinfection process begins with the closing of the
cover. - After successful connection, the storage unit that the endoscope is
placed in is filled with 10 liters of disinfectant and this liquid CONTACTS ALL
CONTAMINATED AREAS IN THE BASIN. - The disinfectant is delivered through channels with appropriate
pressure and amount to enable evacuation of contaminated materials. - The disinfection process is successfully accomplished by following
rinsing and channel drying. - The report of washing and disinfection process can be printed out and
this information can be archived by sending them to medGate server. - Hygienic silicone cover seal
- Easy to open and to close transparent cover
- Double sided specially designed hinge
- Water tap
- Disinfectant tap
- Endoscope channel connector
- Leakage test
- Touch button
- Power key
- LCD information screen
- Enzymatics and alcohol tank cover
- Concentrated disinfectant tank cover
- Locked caster that can roll around 360 degrees.
